Forklift Fuel System

Fuel Systems for Forklifts - The fuel system is responsible for providing your engine the diesel or gasoline it needs in order to work. If any of the separate components in the fuel system break down, your engine would not function right. There are the main parts of the fuel system listed beneath:

Fuel Tank: The fuel tank is a holding cell for your fuel. When filling up at a gas station, the fuel travels downward the gas hose and into your tank. Within the tank there is a sending unit. This is what tells the gas gauge the amount of gas is in the tank.

Fuel Pump: In newer cars, nearly all contain fuel pumps usually positioned inside the fuel tank. Several of the older automobiles will attach the fuel pump to the engine or positioned on the frame next to the tank and engine. If the pump is on the frame rail or in the tank, therefore it is electric and runs with electricity from your cars' battery, whereas fuel pumps that are attached to the engine use the motion of the engine in order to pump the fuel.

Fuel Filter: Clean fuel is essential for engine performance and overall engine life. Fuel injectors have tiny openings which could clog very easily. Filtering the fuel is the only way this could be avoided. Filters could be found either before or after the fuel pump and in some instances both places.

Fuel Injectors: Most domestic cars made after the year 1986, came from the factory with fuel injection. A computer control opens the fuel injectors to allow fuel into the engine, which replaced the carburator who's task initially was to perform the mixing of the fuel and air. This has resulted in lower emission overall and better fuel economy. The fuel injector is basically a small electric valve that opens closes with an electric signal. By injecting the fuel close to the cylinder head, the fuel stays atomized, or inside tiny particles, and could burn better when ignited by the spark plug.

Carburetors: Carburetors have the job of taking the fuel and mixing it with the air without whatever involvement from a computer. Carburetors require repeated rebuilding and retuning although they are easy to operate. This is one of the main reasons the newer vehicles presented on the market have done away with carburetors in favor of fuel injection.

Click to Download the pdf

Forklift Parts

Yale Forklift Part

Yale Forklift Parts - Yale Materials Handling Corporation is a Worldwide association who's of NMHG or NACCO Materials Handling Group. NMHG is the largest maker of forklifts and lift trucks in America. Profits are more than 1.5 billion making them the third biggest in the world. NMHG designs, engineers, manufactures, and sells a complete series of lift trucks using the...

More

---

Pallet Truck Parts

Parts for Pallet Trucks - A pallet stacker is a kind of pallet jack that is utilized to transfer, stack and lift palletized produce that are too heavy for manual lifting. Its key function is to load and unload pallets on trucks, as well as transferring pallets to and from various places within a storage space or stockroom. Most pallet...

More

---

Attachments for Forklift

Forklift Attachment - Utilized to facilitate the moving of heavy items, lift trucks are utilized by a lot of organizations to transport their manufactured goods and to storage their goods. Also, there is a wider range of accessories presented to help make certain that jobs could be done in a more efficient and safer way. Farmers for example, usually have...

More

---

Forklift Torque Converters

Forklift Torque Converters - A torque converter is actually a fluid coupling that is used so as to transfer rotating power from a prime mover, that is an internal combustion engine or as electrical motor, to a rotating driven load. The torque converter is same as a basic fluid coupling to take the place of a mechanical clutch. This enables...

More

---

TCM Forklift Attachments

Attachment for TCM Forklifts - In the international industry of material handling, lift trucks play an important part for transporting industrial goods. Primarily innovated as industrial vehicles in the 1930s in the U.S., forklifts gained popularity after WWII during the 1940s. Becoming a reliable and efficient means to material handling solutions, the practicality and need of these machinery spread globally....

More

---

Clamp Forklift Attachment

Clamp Forklift Attachment - When utilizing forklifts on the jobsite could help decrease the physical workload of the workers making the area a lot safer. In a factory or trade, employee safety is important. Supplies must be lifted, moved, and stored on site without causing any damage or harm to all of the employees. Forklifts are often used in distribution...

More

---

Drum Clamps

Drum Clamp - Forklifts are truly designed to lift, move and store items placed on pallets. For companies that use drums, they normally need an attachment to be able to deal with storing, lifting and moving them. There are several different attachments which a company could utilize for all of your drum moving, storing and lifting needs. These attachments are...

More

---

Barrel Clamps

Barrel Clamp - Known as "Barrel Clamp", this hydraulic accessory is utilized on lift trucks so as to compress objects that you would like to transfer with the lift truck. Typically, they are used in order to paper rolls, barrels, and handle kegs, together with some barrel clamp designs being able to rotate the cargo. Like for instance, the rotate...

More

---